Safety pain points in high-pressure scenarios of mold nitrogen gas springs (such as high-pressure leakage, fatigue explosion, seal failure, etc.), clarifying the dimensions of this article's analysis (raw materials - design - process) and core values (providing references for industry safety upgrades and highlighting the advantages of its own products);

1. Raw Materials: The "Fundamental Guarantee" for High-voltage Safety

(1). Core points of one's own products

Core material selection: Clearly define the materials of key components (BBK-JINGBA brand benchmarked against international counterparts, such as 42CrMoA alloy structural steel for cylinder blocks, 38CrMoAl nitrided steel for piston rods, and high-strength nitrile rubber (NBR), fluorine rubber (FKM/FPM), polyurethane rubber (PU) + carbon fiber reinforced composite materials for seals).

Quantification of performance indicators: List key parameters (tensile strength of cylinder block ≥1200MPa, yield strength ≥950MPa, temperature resistance of sealing parts -20 to 80℃, pressure resistance ≥35MPa, material fatigue life ≥ 1.5 million times);

Compliance support: Explain the industry standards it complies with and provide the number of the third-party test report (PED CE certification).

(2). Comparison with domestic and foreign peers

Contrast dimension	International leading brands (such as KALLER from Sweden and DADCO from the United States)	Domestic counterparts (mid-to-low-end brands)	BBK-JINGBA products
Core material	Customized alloy steel (such as SS2377 + ASSAB8407 from imported seals by KALLER	Ordinary 45# steel, domestic general-purpose seals	42CrMoA + imported reinforced seals
Key performance	Tensile strength 1250-1300 MPa, fatigue life 2 million cycles	Tensile strength 800-1000 MPa, fatigue life 20-300,000 cycles	Tensile strength 1200 MPa, fatigue life 1.5 - 3 million cycles
Trade-off between cost and safety	Priority safety, with high material cost (50% higher than domestic products)	Reduce costs, compromise on material performance	Safety first, cost lower than that of foreign products by 30 - 50%

(3). Key Conclusion 

Our own products have material strength and fatigue life comparable to those of foreign leaders, and are superior to those of domestic mid-to-low-end products. When choosing sealing components, we take into account both high-pressure stability and cost-effectiveness, avoiding the pain point of domestic counterparts where "low-cost materials lead to sealing failure". 

2. Design Structure: The "Core Defense Line" for High-Pressure Safety 

(1). Key points of the company's own products 

Safety-oriented Design: 

Cylinder structure: Adopted optimized wall thickness distribution (the wall thickness at weak parts is increased by 15%), with burst pressure ≥ 50 MPa (far exceeding the rated working pressure by 15 - 30 MPa); 

Pressure relief protection: Dual safety valve design (main safety valve + emergency relief valve), automatically releases pressure when it exceeds the rated pressure by 30%. 

Sealing structure: Unique lightweight groove design + O-ring dual sealing, combined with the nitrided layer on the piston rod (thickness 0.2 - 0.3mm); 

Simulation and test data: Provide pressure resistance test curves (such as maintaining pressure at 15 MPa for 24 hours without leakage), and impact load simulation results (impact resistance times ≥ 1 million times). 

(2). Comparison with domestic and foreign counterparts

Comparison dimension	International leading brands	Domestic counterparts	BBK-JINGBA products
Structural optimization	Safe grooves, pressure relief design, complete redundancy design	No safety groove, pressure relief design, uniform wall thickness (no targeted optimization)	Safe grooves, pressure relief design, complete redundancy design
Pressure relief protection	Double safety valves + rupture discs	No safety valve, significant fluctuation in pressure relief threshold	Double safety valves + rupture discs
Sealing design	Multi-lip seal + imported sealing components	Single O-ring seal, piston rod without strengthening treatment	Latest lip seal + imported sealing components
Testing standards	PED high-pressure container testing	Tested according to GB/T	PED high-pressure container test (higher than domestic standards)

(3). Key Conclusions

Foreign brands have the highest level of safety redundancy, but they have high costs and long delivery cycles; domestic counterparts generally simplify the protection structure and have insufficient sealing reliability; BBK-JINGBA brand products balance "safety performance and cost", and their core design indicators (pressure relief accuracy, leakage volume) are close to those of foreign brands and superior to those of domestic counterparts.

3. Process Handling: "Stability Guarantee" for High-Pressure Safety

(1). Key Points of BBK-JINGBA Brand Products

Key Process Details:

Heat Treatment: The piston rod undergoes "quenching and tempering (860°C quenching + 580°C tempering) + nitriding treatment", with a surface hardness of HV950-1050, increasing wear resistance by 50%;

Surface treatment: Piston rod nitriding treatment (nitrided layer), inner wall honing of cylinder block (roughness Ra≤0.05μm);

Assembly Process: Full-process clean workshop assembly， pre-pressure test of sealing components (pre-pressure pressure 5 MPa)， 100% pressure resistance test before leaving the factory (15 MPa pressure retention for 30 minutes)；

Process Quality Control: Real-time monitoring of key process parameters (such as nitrogenization temperature fluctuation ≤ ±5°C)， with a non-conformity rate of ≤ 0.3%.

(2). Comparison between Domestic and Foreign Competitors

Comparison dimension	International leading brands	Domestic counterparts	BBK-JINGBA products
Heat treatment process	Vacuum heat treatment, parameter accuracy ±2℃	General box-type furnace heat treatment, with parameter fluctuation of ±10℃	Controllable atmosphere heat treatment, parameter accuracy ±3℃
Surface treatment	Plasma nitriding + PTFE coating	General chrome plating or without surface strengthening	Nitriding layer + honing, roughness approaching that of foreign products
Assembly and Inspection	Automated assembly + full-process inspection	Manual assembly + random inspection (random inspection rate 10%)	Semi-automated assembly + 100% factory inspection
Process Stability	Pass rate 99.8%	Pass rate 90-91%	Pass rate 99.7%

(3). Key Conclusion

Foreign brands have the highest level of process automation and refinement, as well as the best stability; domestic counterparts have the problem of "simplification of processes and inadequate inspection", resulting in poor product consistency; the nitrided layer products achieve process stability close to that of foreign brands through "key process upgrades + comprehensive inspection and quality control", far exceeding that of domestic counterparts.